Further to my lack of rear screen washer. I removed the rear wing to get at the jet but the problem is not there. The jet and short part of the detachable pipe were clear and switching the pump on, no water got to the open pipe before the jet. So next I took a look under the rear seat and oh dear, it looks like the water pipe has been bound up in the middle of the loom. I had already looked at the pump behind the little panel in the OSF wheel arch and it did not appear to be leaking from there but the water level drops when I operate the pump so the water is going somewhere. The next stage is get it up on ramps and operate the pump again. Has anyone else had problems with their rear washer?
use an air line to check pipe work??